LY Pressure Type Plate Oil Purifier
LY pressure type plate oil purifier is designed for electric power plants, power stations, lubricant warehouse in substations of industrial and mining enterprises. It is widely used in industries of electricity, pretrochemical, metallurgy and national defense. It is used for filtering water and impurities from transformer oil, turbine oil, aviation hydraulic oil and other types of oil.
Download
Description
Advantages
- Simple structure, stable and dependable.
- Easy-to-change filter paper.
- Easy to use and adaptable to different environment requirements.
- Limited by gear structure, special materials or electric machines are needed for non-lubricating oils like gasoline and kerosene. When the content of water is too much, the oil should be heated before filtering. If the oil is too dirty, it has to be processed first before filtering.
Technological Flow Chart And Working Principle
| Figure No. | Name | Figure No. |
|
| 1 | Caster | 9 | Handle |
| 2 | Inlet oil | 10 | Drain valve |
| 3 | Filter | 11 | Return valve |
| 4 | Pressure gauge | 12 | Motor |
| 5 | Filtering board | 13 | Control switch |
| 6 | Filtering frame | 14 | Oil pump |
| 7 | Filtering paper | 15 | Oil tank |
| 8 | Baffle | 16 | Outlet oil |
Working Principle:
When the oil filter working, the dirty oil is distributed into each filter frame through the input channel. After passing through the filter paper, it enters the through hole of the filter plate. When compacted, it forms two complete channels, and the ear itriangular introduces dirty oil. After filtering through the filter chamber, drawing clean oil from another corresponding channel. Clean oil collects in the output channel and exits the machine. The dirt remains on the surface of the filter paper, and a small amount of water in the dirty oil is absorbed by the capillary in the filter paper. When the filter residue on the surface of the filter paper is gradually thickened and the moisture content in the filter paper increases, the filtration resistance increases, and should be stopped when increased to a certain extent. Filter, replace the filter paper, and continue to use.
Technical Data & Selection Guide
| Item | Unit | LY-30 | LY-50 | LY-100 | LY-120 | LY-150 | LY-200 | LY-300 |
| Filtering ability | L/min | 30 | 50 | 100 | 120 | 150 | 200 | 300 |
| Filtering area | m2 | 0.3 | 0.7 | 1.3 | 1.54 | 1.89 | 2.46 | 3.18 |
| Filter paper and dimensions | mm | 200*200 | 200*200 | 295*295 | 295*295 | 295*295 | 295*295 | 295*295 |
| Filter board | piece | 11 | 13 | 15 | 17 | 20 | 25 | 31 |
| Filtering precision | um | 5 -10 | ||||||
| Working pressure | MPa | 0 - 0.33 | ||||||
Download
